Drills and Drill Bits
Grainger Sq. End Mill Single End Carb 0.0080
The Grainger Approved Square End Mill Single End is a high-speed steel end mill with a square end for milling slots, keyways, and pockets. It has four flutes and a right-hand spiral. The overall length is 3 inches and the shank diameter is 0.5 inches. The mill diameter is 0.625 inches. This end mill is uncoated and made in the USA. It can be used for slotting, side milling and pocketing in low carbon steels at surface speeds up to 120 SFM when paired with rigid setups.
Grainger End Mill Kyocera MEW 1500W125153T 1.50
The Kyocera 170HK1 is a 1/2" diameter, 4 flute, high speed steel end mill with a 1-1/2" overall length. It has a TiAlN coating for increased hardness and heat resistance. The end mill has a 30 degree helix angle and is center cutting for plunge cuts. It is designed for slotting, profiling, contouring, and facing in steels, cast iron, aluminum, and other non-ferrous metals at speeds up to 325 SFM.
Grainger Thread Mill Carbide
The Micro 100 16R775 is a 1/4" diameter, 3/4" long, 4 flute carbide thread mill with a right hand spiral flute. It has a TiAlN coating and can cut 60-62 HRC materials. The thread mill has a 1/4"-28 UNF shank and can cut thread sizes from #10-24 UNF to 1/4"-28 UNF. It has AlTiN nano coating for wear resistance and increased tool life. The thread mill body is made of micrograin carbide with high cobalt content for strength and heat resistance. It can machine a variety of materials including steel, stainless steel, cast iron, aluminum, titanium and high temp alloys. It is designed for high performance threading in production environments.
Grainger Face Mill MFWN 903000R4T M-SIX 300
The Kyocera Face Mill is a high-performance face milling cutter designed for high-speed machining of aluminum and non-ferrous metals. It features a 2-flute design with replaceable carbide inserts that provide a smooth finish and long tool life. The cutter body is made of heat-treated alloy steel for rigidity and durability. It has a 1" arbor hole and is available in diameters ranging from 1" to 4". The cutter can achieve surface speeds up to 13,000 SFM and feed rates up to 0.004 IPR. With its rigid construction and sharp cutting edges, this face mill is ideal for facing, slotting, side milling, and contouring operations where an excellent finish is required.
Grainger Sq. End Mill Single End Carb 1/2
The 14M684 is a Grainger 4-Ton Bottle Jack manufactured by Torin. It has a lifting range of 11-7/8" to 16-1/4" and a lowered height of just 9". The jack has a steel frame and baseplate and includes an extension screw for adjusting height. Its maximum lifting capacity is 8,000 lbs. The jack's handle is 45 degrees offset for increased leverage and its wide base provides stability under load. This heavy duty hydraulic jack is designed for shop use and farm equipment repair.
Grainger Sq. End Mill Single End Carb 2.00mm
The Grainger 14K572 is a 14.4V lithium-ion battery pack made by Milwaukee. It has a 5.0Ah capacity and weighs 2.5 lbs. The battery is compatible with Milwaukee M18 tools and chargers. Key features include REDLITHIUM technology for longer run-time and battery life, as well as overload protection for added safety. The battery has LED fuel gauge to show charge level. It can fully recharge in under an hour with a rapid charger. The battery has a 3 year warranty. This lithium-ion battery pack delivers power, performance and runtime for Milwaukee cordless tools.
Grainger Sq. End Mill Single End Carb 3/64
The Grainger 14M349 is a Milwaukee 48-22-8410 M18 FUEL 1/2 in. Hammer Drill Kit that includes a 1/2 in. hammer drill, two M18 REDLITHIUM XC 5.0Ah battery packs, an M18 and M12 charger, and a carrying bag. This is a cordless hammer drill that provides up to 600 in-lbs of torque and 0-2,000 BPM with REDLINK Intelligence to protect against overloading, overheating, and overdischarging. It has a POWERSTATE brushless motor for longer motor life and more run time. The included batteries provide more work per charge and more charges over pack life. This kit comes with everything needed to start drilling and driving right out of the box.
Grainger Sq. End Mill Single End Carb 1/32
The Grainger 14M342 is a 3M Scotch-Brite General Purpose Hand Pad that features an open web construction and is made of nylon and synthetic fibers. This 8" x 4" hand pad has a medium duty scrubbing level and is ideal for cleaning pots, pans, dishes, flatware, and other kitchen items. It effectively removes dried or burnt on foods without scratching. The pad is latex-free, disposable, and can be used wet or dry. Overall, the 3M Scotch-Brite 14M342 General Purpose Hand Pad is a versatile scrubbing tool for various cleaning tasks.